 |
*Step #1: Take out the four rubber screw covers by using a thumb tack, please note that the two top (RED CIRCLEs) rubber pieces are bigger.*
*Step #2: Remove the four T5 (Torx Five) screws by using a T5 screwdriver.*
*Step #3: This face is clipped on with 6 clips (LEFT pic: outside view, RIGHT pic: inside view). Start by unclipping RED clips, then BLUE clips, and then GREEN (which require no effort at all). Take your time and remove the old face, this can be tricky and hard.*
*Step #4: This is the easiest part, just do everything backwards with the new face. Snap together GREEN >then> BLUE >then> RED. Screw in the screws, and put in the screw covers (BIG ones on top holes, small/flat ones on bottom holes.)*
Questions /
Problems? Get help at our
forums!
|
|
